Molding Preparation | Thermoform Templates
This is our Mounting Preparation category. Mounting Templates allow for the thermoform sheets to be modified to allow for attachments to fit holsters or sheaths. These templates fits our more popular attachments. The mounting templates also allow for the holsters to be built for adjustable retention. Use these mounting templates to optimize your next holster or sheath.
Molding Preparation - Dowel Rods for Site Channel Clearance - (6.0 x .375 inches) - (5 Pack)
This is a (5-Pack) of 6.0 x 0.375 inch wooden dowel rods. They are used for creating site…
- Model
- DOWELROD-5
Molding Preparation - Retention Plate - for 1911 - (Full Size) - (No Rail)
This is a retention plate for thermoform holster making. It is 0.187 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-1911-FULL-NR-1
Molding Preparation - Retention Plate - for Beretta 92/96 - (Full Size)
This is a retention plate for thermoform holster making. It is 0.187 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-BER-9296-F-1
Molding Preparation - Retention Plate - for FNX 45
This is a retention plate for thermoform holster making. It is 0.250 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-FNX-45-1
Molding Preparation - Retention Plate - for Glock 17
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-GLOCK-17-1
Molding Preparation - Retention Plate - for Glock 19
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-GLOCK-19-1
Molding Preparation - Retention Plate - for Glock 26
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-GLOCK-26-1
Molding Preparation - Retention Plate - for Glock 29
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-GLOCK-29-1
Molding Preparation - Retention Plate - for Glock 34
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-GLOCK-34-1
Molding Preparation - Retention Plate - for Glock 42
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-GLOCK-42-1
Molding Preparation - Retention Plate - for Glock 42 w/TLR6
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-GLOCK42-TLR6-1
Molding Preparation - Retention Plate - for Glock 43
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-GLOCK-43-1
Molding Preparation - Retention Plate - for Glock 43 w/TLR6
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-GLOCK43-TLR6-1
Molding Preparation - Retention Plate - for M&P Compact
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-MPC-1
Molding Preparation - Retention Plate - for M&P Shield 45
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-SHIELD45-1
Molding Preparation - Retention Plate - for M&P Shield 9/40
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-SHIELD940-1
Molding Preparation - Retention Plate - for Sig Sauer P320 (Compact)
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-P320-C-1
Molding Preparation - Retention Plate - for Springfield XD MOD II - (3in)
This is a retention plate for thermoform holster making. It is 0.25 inch in thickness and allows the…
- Model
- DM-MP-RETPLT-XDM2-3-1
Molding Preparation - Retention Plates - (Split Mold) - for Glock 17
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for holster…
- Model
- DM-MP-RETPLT-SPLT-GLOCK-17-1
Molding Preparation - Retention Plates - (Split Mold) - for Glock 19
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-GLOCK-19-1
Molding Preparation - Retention Plates - (Split Mold) - for Glock 26
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-GLOCK-26-1
Molding Preparation - Retention Plates - (Split Mold) - for Glock 29
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-GLOCK-29-1
Molding Preparation - Retention Plates - (Split Mold) - for Glock 34
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-GLOCK-34-1
Molding Preparation - Retention Plates - (Split Mold) - for Glock 42
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-GLOCK-42-1
Molding Preparation - Retention Plates - (Split Mold) - for Glock 42 w/TLR6
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-GLOCK42-TLR6
Molding Preparation - Retention Plates - (Split Mold) - for Glock 43
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-GLOCK-43-1
Molding Preparation - Retention Plates - (Split Mold) - for Glock 43 w/TLR6
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-GLOCK43-TLR6
Molding Preparation - Retention Plates - (Split Mold) - for M&P Compact
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-MPC-1
Molding Preparation - Retention Plates - (Split Mold) - for M&P Shield 45
These are split-mold retention plates for thermoform holster making. They allow the maker to create retention/clearance for…
- Model
- DM-MP-RETPLT-SPLT-MPS45-1
Molding Preparation - Slide Release Blocking - Universal
This is a universal slide release block for thermoform holster making. It is 0.125 inch in thickness and…
- Model
- DM-MP-SLDBLK-UNI-1
Molding Preparation - Slide Spacer - Universal
This is a universal slide spacer for thermoform holster making. It is 0.1 inch in thickness and allows…
- Model
- DM-MP-SLDSPC-UNI-1
Molding Preparation - Trigger Spacer - Fits Glock - (.125)
This is a trigger spacer for Glock brand firearms. It is 0.125 inch in thickness and allows the…
- Model
- DM-MP-TRGSPC-GLK-125-1
Molding Preparation - Wallet Jig - (.250)
This is a wallet jig. It is 0.25 inch in thickness and allows the maker to create a…
- Model
- DM-MP-WALLET-250-1
Molding Preparation - Wallet Jig - (.375)
This is a wallet jig. It is 0.375 inch in thickness and allows the maker to create a…
- Model
- DM-MP-WALLET-375-1
Molding Preparation - Wallet Jig - (.500)
This is a wallet jig. It is 0.500 inch in thickness and allows the maker to create a…
- Model
- DM-MP-WALLET-500-1
Mounting/Drilling Template - (.875 Dual Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with a 7/8 inch dual-adjustable height/cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-875-DUALHC-1
Mounting/Drilling Template - (.875/15° Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help create…
- Model
- DM-MT-FLUSH-875-15-1
Mounting/Drilling Template - (.875/15° Adjustable) - (fits Flush Mount/FOMI Clips) - (Thin)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help create…
- Model
- DM-MT-FLUSH-875-15-T-1
Mounting/Drilling Template - (.875/20° Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with an adjustable 20° cant ability. It is designed to help create…
- Model
- DM-MT-FLUSH-875-20-1
Mounting/Drilling Template - (.875/20° Adjustable) - (fits Flush Mount/FOMI Clips) - (Thin)
This is an attachment mounting template with an adjustable 20° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-875-20-T-1
Mounting/Drilling Template - (1.0 Dual Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with a 1 inch dual-adjustable height/cant ability. It is designed to…
- Model
- DM-MT-FLUSH-1-DUALHC-1
Mounting/Drilling Template - (1.0/15° Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help create…
- Model
- DM-MT-FLUSH-1-15-SLOT-1
Mounting/Drilling Template - (1.0/15° Adjustable) - (fits Flush Mount/FOMI Clips) - (Thin)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help create…
- Model
- DM-MT-FLUSH-1-15-SLOT-T-1
Mounting/Drilling Template - (1.0/18° Adjustable) - (fits Flush Mount/FOMI Clips)
This is an attachment mounting template with an adjustable 18° cant ability. It is designed to help…
- Model
- DM-MT-FLUSH-1-18-1
Mounting/Drilling Template - (1.0/18° Adjustable) - (fits Flush Mount/FOMI Clips) - (Thin)
This is an attachment mounting template with an adjustable 18° cant ability. It is designed to help create…
- Model
- DM-MT-FLUSH-1-18-T-1
Mounting/Drilling Template - (10° Adjustable) - (Blade-Tech™ Short Drop)
This is an attachment mounting template with an adjustable 10° cant ability. It is designed to help create…
- Model
- DM-MT-BTSD-10-1
Mounting/Drilling Template - (10° Adjustable) - Speed Ease Jig (for OWB Taco)
This is an attachment mounting template with an adjustable 10° cant ability. It is designed to help create…
- Model
- DM-MT-SPDESE-10-1
Mounting/Drilling Template - (15° Adjustable) - (fits Large Tek-Lok, DCI Combat Loop)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help create…
- Model
- DM-MT-TL-LG-15-1
Mounting/Drilling Template - (15° Adjustable) - (fits Large Tek-Lok, DCI Combat Loop) - (Thin)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-TL-LG-15-T-1
Mounting/Drilling Template - (15° Adjustable) - (fits Small Tek-Lok)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-TL-SM-15-1
Mounting/Drilling Template - (15° Adjustable) - (fits Ulticlip)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help…
- Model
- DM-MT-ULTI-15-1
Mounting/Drilling Template - (15° Adjustable) - (fits Ulticlip) - (Thin)
This is an attachment mounting template with an adjustable 15° cant ability. It is designed to help create…
- Model
- DM-MT-ULTI-15-T-1
Mounting/Drilling Template - (Adjustable) - (fits RCS Overhook/Strut)
This is an adjustable attachment mounting template. It is used to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RCS-OVRSTRT-1
Mounting/Drilling Template - (Adjustable) - (fits RCS Overhook/Strut) - (Thin)
This is an adjustable attachment mounting template. It is used to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RCS-OVRSTRT-T-1
Mounting/Drilling Template - (fits Blade-Tech Duty Drop)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for the…
- Model
- DM-MT-BT-DD-1
Mounting/Drilling Template - (fits Blade-Tech WRS Hood)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-BT-WRS-1
Mounting/Drilling Template - (fits Blade-Tech WRS Hood) - (Thin)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-BT-WRS-T-1
Mounting/Drilling Template - (fits Bravo Concealment & RCS Pancake Loops)
This is an adjustable attachment mounting template. It is used to help create the hole mounting/drilling pattern…
- Model
- DM-MT-RCS-PANLOOP-1
Mounting/Drilling Template - (fits G-Code RTI 33/34 Hanger RH/LH)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RTI3334-1
Mounting/Drilling Template - (fits G-Code RTI GCA 35 Hanger)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-RTI-GCA35-1
Mounting/Drilling Template - (fits Safariland ELS)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for the…
- Model
- DM-MT-SAFLND-ELS-1
Mounting/Drilling Template - (fits Safariland Paddle) - UBL Drop Jig
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-SAFLND-UBL-1
Mounting/Drilling Template - (fits Safariland SLS Hood)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for the…
- Model
- DM-MT-SAFLND-SLSHOOD-1
Mounting/Drilling Template - (fits Safariland SLS Hood) - (Thin)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-SAFLND-SLSHOOD-T-1
Mounting/Drilling Template - (Non-Adjust) - (fits Large Tek-Lok)
This is a fixed attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-TL-LG-NA-1
Mounting/Drilling Template - (Non-Adjust) - (fits Large Tek-Lok) - (Thin)
This is a fixed attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-TL-LG-NA-T-1
Mounting/Drilling Template - (Non-Adjust) - (fits Small Tek-Lok)
This is a fixed attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-TL-SM-NA-1
Mounting/Drilling Template - Combo Jig
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for…
- Model
- DM-MT-COMBO-1
Mounting/Drilling Template - Combo Jig - (Thin)
This is a fixed attachment mounting template. It is designed to help create the hole…
- Model
- DM-MT-COMBO-T-1
Mounting/Drilling Template - Straight - (.875) - (fits Flush Mount/FOMI Clips)
This is a straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling…
- Model
- DM-MT-FLUSH-875-STR-1
Mounting/Drilling Template - Straight - (.875) - (fits Flush Mount/FOMI Clips) - (Thin)
This is a straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-FLUSH-875-STR-T-1
Mounting/Drilling Template - Straight - (1.0) - (fits Flush Mount/FOMI Clips)
This is a straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-FLUSH-1-STR-1
Mounting/Drilling Template - Straight - (1.0) - (fits Flush Mount/FOMI Clips) - (Thin)
This is a straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling pattern…
- Model
- DM-MT-FLUSH-1-STR-T-1
Mounting/Drilling Template - Straight - (fits FabriClip)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for a…
- Model
- DM-MT-FABRICLP-1
Mounting/Drilling Template - Straight - (fits Molle-Lok®/Malice Clip)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for a…
- Model
- DM-MT-BT-MOLLE-1
Mounting/Drilling Template - Straight - (fits RCS Overhook/Strut)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for a…
- Model
- DM-MT-RCSSTRUT-1
Mounting/Drilling Template - Straight - (fits RCS Overhook/Strut) - (Thin)
This is an attachment mounting template. It is designed to help create the hole mounting/drilling pattern for a…
- Model
- DM-MT-RCSSTRUT-T-1
Mounting/Drilling Template - Straight - 6 Hole (0.187 Diameter) - (0.75 Hole Spacing)
This is a 6-hole straight pattern drilling template for KYDEX® holsters. It is designed to help create the…
- Model
- DM-MT-75-STR-6-1
Mounting/Drilling Template - Straight - 6 Hole (0.25 Diameter) - (0.75 Hole Spacing)
This is a 6-hole straight pattern attachment mounting template. It is designed to help create the hole mounting/drilling…
- Model
- DM-MT-75-STR-6-250-1
Mounting/Drilling Template - Straight - 6 Hole (0.25 Diameter) - (1.0 Hole Spacing)
This is a 6-hole straight pattern drilling template for KYDEX® holsters. It is designed to help create the…
- Model
- DM-MT-1-STR-6-250-1
Photo Gallery #1 Sales/Support 
|
